Filter
Top Products
T5n/T4n/T3n Owner’s Manual
5
Controls and Functions............................ 6
Front Panel .......................................................... 6
Rear Panel .......................................................... 7
Speaker Connections ............................... 8
STEREO Mode ................................................... 8
PARALLEL Mode ................................................ 8
BRIDGE Mode .................................................... 9
Wiring....................................................... 10
Using a Euroblock connector ............................ 10
Speaker Connection .......................................... 10
Filter Element Cleaning .......................... 11
Troubleshooting...................................... 11
Specifications.......................................... 12
Block Diagram......................................... 71
Dimensions.............................................. 72
Performance Graph ................................ 73
Current Draw ........................................... 73
Introduction
Thank you for your purchase of the YAMAHA T5n, T4n, T3n Series Power Amplifier.
This series of power amplifiers was developed from Yamaha’s wealth of experience in building PA
equipment and its tradition of careful attention to every detail of circuit design. These power amplifiers
feature high power — thanks to EEEngine (Energy Efficient Engine) technology — and superb quality
together with superior reliability and stability, guaranteeing the highest possible audio performance.
Features:
• Three modes are provided to support a broad range of applications: STEREO mode which can be driven by two
independent sources, PARALLEL mode in which a monaural source drives both channels, and BRIDGE mode
in which the two internal amps function as a single high-power mono amp.
• Balanced XLR connector and Euroblock connector inputs, and Speakon connector and five-way binding post
outputs are provided.
• SIGNAL indicator, CLIP indicator and MUTE indicator and sophisticated dB step Volume control are provided
for each channel.
•PROTECTION indicator that shows the state of various protection systems (power On/Off detection, output
protection, DC detection), a TEMP indicator that indicates heat sink overheating, and a POWER/STANBY indi-
cator that indicates the power status are provided.
•Variable-speed low-noise fans ensure high reliability.
• The
T5n
enables parallel connection of multiple high-impedance speakers that support 100 V line output.
• The
T3n
enables parallel connection of multiple high-impedance speakers that support 70 V line output.
• An optional external amp control unit, such as the ACU-16C, enables you to monitor or control the amplifier via
a network. For the latest information about amp control units, please visit our website:
http://www.yamahaproaudio.com/
This Owner’s Manual applies to the three models: T5n, T4n and T3n power amplifiers.
Please read through this manual carefully before beginning use, so that you will be able to take full
advantage of your power amp’s superlative features and enjoy trouble-free operation for years to come.
Accessories
Owner’s Manual
Two handles
Four flat-head screws
Two Euroblock connectors
Index