Yamaha RX-V795RDS Stereo Amplifier User Manual


 
55
English
Program No. 6 to 10: Hi-Fi DSP programs (for audio sources)
When the input signal is analog or PCM audio: ( )
Speaker output: main, rear
When the input signal is encoded with the Dolby Digital (not in 2 channels): ( )
Speaker output: main, center, rear
When the input signal is encoded with the DTS: ( )
Speaker output: main, center, rear
DSP
DSP
DIGITAL
DSP
BASIC OPERATION
FEATURE
This program recreates the acoustic environment of a lively
disco in the heart of a very lively city. The sound is dense and
highly concentrated. It is also characterized by a high-energy,
“immediate” sound.
This program is ideally suited for rock music. You will
experience a very dynamic or lively sound field.
This is a small, cozy jazz club with a low ceiling. The sound is
very close and intimate.
This program recreates the acoustic environment of a big
church with a high pointed dome and columns along the sides.
This interior produces very long reverberations.
In this program, the center will appear to be deep behind the
main speakers, creating an expansive large hall ambience.
Orchestra and opera music are suited for this sound field.
PROGRAM
DISCO
ROCK CONCERT
JAZZ CLUB
CHURCH
CONCERT HALL
No.
6
7
8
9
10
FEATURE
This program is designed specifically to enhance mono
source programs. Compared to a strictly mono setting, the
sound image created in this mode is wider and slightly
forward of the speaker pair, lending an immediacy to the
overall sound. It is particularly effective when used with old
mono movies, news broadcasts and dialog.
This program is furnished with a tight sound field in which the
sound will not spread excessively on the front side, but the rear
surround side produces a dynamic sound expansion. This
program is the most suitable for sports programs.
PROGRAM
MONO MOVIE
TV SPORTS
No.
4
5
For program No. 4 and 5 only, indicators light up as follows.
When the input signal is analog or PCM audio: ( )
When the input signal is encoded with the Dolby Digital (not in 2 channels): (
)
When the input signal is encoded with the DTS: ( )
DSP
DSP
DIGITAL
DSP