Filter
Top Products
17
ENGLISH
PRESET
MEMORY
MHz
FM
MEMORY
MHz
FM
2/1
3,54/2
PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you
can select any desired station simply by specifying the corresponding preset station number. Up to 40 stations (8 stations
per page) can be stored.
To store stations
1 Tune in the desired station.
(Refer to the previous page for tuning procedures.)
2 Press the MEMORY button.
4 While the MEMORY indicator blinks, press the
PRESET STATIONS button so that the desired preset
station number (1 - 8) appears on the display.
PRESET
MEMORY
MHz
FM
Selected preset station number
PRESET STATIONS
DOWN UP
\
5 Press the MEMORY button.
MEMORY
Shows the displayed station
has been stored in A1.
PRESET
MHz
FM
\
To recall a preset station
1 Select the page of the preset station to be received
by pressing the A/B/C/D/E button.
A/B/C/D/E
PRESET
MHz
FM
Appears.
\
2 Press the PRESET STATIONS button so that the
desired preset station number (1 - 8) appears on the
display.
PRESET STATIONS
DOWN UP
Notes
÷ A new setting can be stored in place of the former one.
÷ For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
÷ Perform steps 1 through 5 to store other stations.
Memory back-up
The memory back-up circuit prevents the stored data from
being lost even if the POWER switch is turned off or the
power plug is disconnected from the AC outlet or the power
is cut due to temporary power failure. If, however, the
power is cut for more than two weeks, the memory may be
erased. If so, it can be re-stored simply by following the
PRESET TUNING steps.
MEMORY
Blinks for about 5 seconds.
\
3 Select the desired page (A – E) by pressing the A/B/
C/D/E button.
A/B/C/D/E
\
Appears.