Filter
Top Products
62 En
Remote control features
You can control other components by setting the
appropriate remote control codes. For a complete list of
available remote control codes, refer to “List of remote
control codes” at the end of this manual.
Remote control code default settings
You may not be able to operate your Yamaha component even if a
Yamaha remote control code is preset as listed above. In this case,
try setting another Yamaha remote control code.
1 Press one of the input selector buttons (A)
on the remote control to select the input area
you want to set up.
2 Press
U
CODE SET using a ballpoint pen or a
similar object.
The TRANSMIT indicator on the remote control
flashes twice, and selected input selector button lights
up.
3 Press the numeric buttons (0 to 9) (
B
) to
enter the five-digit remote control code for
the component to be used.
The TRANSMIT indicator on the remote control
flashes twice, and the remote control code for the
selected component is set.
y
Refer to “List of remote control codes” at the end of this
manual.
• If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
• If you do not press any buttons within 30 seconds in step
3, the setup process is canceled. If this happens, repeat the
setup procedure.
• If you enter the code number “9980”, the remote control
code previously set for the selected input area is cleared.
Setting remote control codes
Input
source
Component
category
Manufacturer
Default
code
CD CD YAMAHA 62000
MD/CD-R CD-R YAMAHA 71292
DVD DVD YAMAHA 42000
DTV/CBL – – –
TUNER TUNER YAMAHA 82005
XM TUNER YAMAHA 82006
V-AUX
OTHER AUDIO
ACCESSORIES
(iPod)
YAMAHA 82000
DVR DVR YAMAHA 52001
–––
–––
Note
Notes
CD
CD-R
DVD
DTV
MD
CBL
TUNER
V-AUX
DOCK
DVR
XM
TRANSMIT
STANDBY
POWER
POWER
POWER
AV
TV
TRANSMIT
CODE SET
DVD
Flashes
Lights up
TRANSMIT
5678
90
1234
MUSIC
ENTERTAIN MODE
STEREO
ENHANCER
STRAIGHT
DIRECT ST.
SUR. DECODE
NIGHT
Flashes