Yamaha RX-V450 Stereo Receiver User Manual


 
28
PLAYBACK
Remote control operation
Press AMP to select the AMP mode, then press
one of the sound field program buttons
repeatedly to select the desired program.
The name of the selected program appears in the front
panel display.
y
Feel free to choose a sound field program based on your listening
preference, and not purely on the name of the program itself.
When you select an input source, this unit automatically selects
the last sound field program used with that source.
Sound field programs cannot be selected when MULTI CH
INPUT is selected.
Sampling frequencies higher than 48 kHz (except for DTS 96/
24 signals) will be sampled down to 48 kHz, then sound field
programs will be applied.
Enjoying multi-channel software
If you connected a surround back speaker, use this feature
to enjoy 6.1-channel playback for multi-channel sources
using the Dolby Pro Logic IIx, Dolby Digital Surround
EX or DTS-ES decoders.
Press AMP on the remote control to select the
AMP mode, then press EX/ES to switch between
5.1 and 6.1-channel playback.
To select a decoder, press j / i repeatedly while
PLIIxMusic (etc.) is displayed.
AUTO (AUTO)
When a signal (flag) that can be recognized by the unit is
input, the unit selects the optimum decoder for playing
back the signal in 6.1 channels.
If the unit cannot recognize the flag or no flag is present in
the input signal, it cannot automatically be played in 6.1
channels.
Decoders (select with j / i)
You can select from the following decoders depending on
the format of the software you are playing.
PLIIxMusic
For playing back Dolby Digital or DTS signals in 6.1
channels using the Pro Logic IIx music decoder.
EX/ES
For playing back Dolby Digital signals in 6.1 channels
using the Dolby Digital Surround EX decoder.
DTS signals are played back in 6.1 channels using the
DTS-ES decoder.
EX
For playing back Dolby Digital or DTS signals in 6.1
channels using the Dolby Digital Surround EX decoder.
OFF (OFF)
Decoders are not used to create 6.1 channels.
Notes
TRANSMITCODE SET
STANDBY
SYSTEM
POWER
CD
MD/CD-R
TUNER
V-AU X
DVD
AMP
POWERPOWER
VOLUME
TV MUTE TV INPUT
TV VOL TV CH
AVTV
VCR
DTV/CBL
MULTI CH IN
SLEEP
MUTE
MENUTITLE
VOLUME
SET MENU
LEVEL
A/B/C/D/E
STRAIGHT
ROCKJAZZHALLSTEREO
4321
8
10
7
09
65
ENTER
MOVIETV THTRMUSIC ENTERTAIN
EX/ESNIGHT
q
/DTS
EFFECT
TV MUTE TV INPUT
TV VOL TV CH
SELECT
PRESET/CH
Sound field
program
buttons
AMP
CDTUNER
MD/CD-R
DVD
HiFi DSP
DTV/CBL
V-AUXVCR
96
24
q
PL
q
EX
MATRIX DISCRETE
SILENT CINEMA NIGHT
ZONE2
PTY HOLD AUTO
PS RT CT EONPTY
TUNED STEREO MUTE
VOLUME
MEMORY
SLEEP
VIRTUAL
PCM
q
PL
q
PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L C R
SL SB SR
q
DIGITAL
t
01DJAZZA CLUBO00
AMP
Program name
STRAIGHT
ROCKJAZZHALLSTEREO
4321
8
10
7
09
65
ENTER
MOVIETV THTRMUSIC ENTERTAIN
EX/ESNIGHTq/DTS
EFFECT
10
EX/ES
AMP
SELECT
PRESET/CH
00_RXV450_U_EN.book Page 28 Monday, February 16, 2004 7:03 PM