Filter
Top Products
English
43
SET MENU Items
13. SP DELAY TIME
Use this feature to adjust the delay of the Center and the Rear Center channel sounds.
This feature works when this unit decodes DTS or Dolby Digital signals. Ideally, the
Center speaker and the Rear Center speaker should be the same distance from the
main listening position as the left and right Main speakers. However, in most home
situations, the Center speaker or the Rear Center speaker is placed in line with the
Main speakers or the Rear speakers. By delaying the sound from the Center speaker
and the Rear Center speaker, the apparent distance from the Center speaker and the
Rear Center speaker to the main listening position can be adjusted to make it seem the
same as the distance between the left and right Main speaker, and the left and right
Rear speakers to the listening position. Adjusting the delay time for the Center
speaker is especially important for giving depth to the dialogue.
You can adjust the delay time from 0 ms to 5 ms for the Center speaker and
from 0 ms to 30 ms for the Rear Center speaker.
• Increasing the delay 1 ms simulates moving the speakers about 30 cm (one
foot) farther away from the listening position.
14. DISPLAY SET
■ BLUE BACK > AUTO/OFF
You can set the OSD background to blue if the video source is not being
reproduced (or the power of the source component is off).
■ OSD SHIFT
This setting is used to adjust the vertical position of the OSD.
■ DIMMER
You can adjust the brightness of the front panel display.
15. MEMORY GUARD
Use this feature to prevent accidental changes to DSP program parameter values and
other settings on this unit.
Select “ON” to use MEMORY GUARD to protect the following features:
• DSP program parameters
• All SET MENU items
• Front, Rear Center speaker and Subwoofer levels
• The On-Screen Display mode
Notes:
• When MEMORY GUARD is “ON”, you cannot use any of the test modes.
• When MEMORY GUARD is “ON”, you cannot select any other SET MENU item.
13 SP DLY TIME
CENTER………………0ms
13 SP DELAY TIME
CENTER………………0ms
REAR CNTR………3ms
≥
14 DISPLAY SET
BLUE BACK……AUTO
14 DISPLAY SET
BLUE BACK………AUTO
OSD SHIFT………………0
DIMMER………………………0
≥
15 MEMORY GUARD
“OFF ON
15 MEMORY GUARD
>OFF ON
16. ZONE 2 SET
Select ZONE2 OUT to change the setting of the ZONE 2 output volume.
Select “FIXED” when you don’t want to change the volume of output to
ZONE 2 with the remote control.
Selecting “VAR.” allows you to control the volume output to ZONE 2 with
the remote control.
16 ZONE2 SET
FIXED VAR.
16 ZONE2 SET
“FIXED VAR.