Filter
Top Products
6
PLAYBACK (Common to DECKs A and B)
Preparation for playback
÷ Turn on the STANDBY/ON switch.
÷ Set your amplifier or receiver to cassette deck function mode.
BASIC OPERATION - To play back a cassette tape
EJECT
DOLBY NR
OFF/ B/ C
Refer to the following
description.
MODE
“/[/”/
RELAY
21
35
4
Refer to the following
description.
DIRECTION
Select the tape running direction for DECK A
or B. Each time this button is pressed, the
tape running direction changes between
forward (#) and reverse (@), and the
corresponding indicator lights on the display.
To stop playback
Press the & button. To remove the cassette tape, press the
EJECT button. The cassette compartment door opens. To
set the unit to standby mode, press the STANDBY/ON
button.
To set the counter reading to “0000”
Press the RESET button. Use the tape counter to aid in
locating a point on a tape (0000 to 9999).
To fast forward or rewind the tape
When the tape running indicator # is lit:
Pressing the ⁄ button fast forwards the tape while
pressing the ! button rewinds the tape.
When the tape running indicator @ is lit:
Pressing the ! button fast forwards the tape while
pressing the ⁄ button rewinds the tape.
Insert the cassette with the exposed tape side facing down. (The side
facing you is called the forward side and the opposite side is called the
reverse side.) To close the compartment, push the section of the
compartment door marked % CLOSE until it locks shut.
PLAY
NATURAL SOUND CASSETTE DECK K-903
DOLBY NR
OFF/ B/ C
REC LEVEL
PHONES
DIRECTION
STANDBY/ON
MODE
O / p / ∏ / RELAY
! ⁄
&
SEARCH
PLAY PLAY
EJECT
NORMAL HIGH
DUBBING A # B
!⁄
&
MUTE/SEARCH REC/PAUSE
EJECT
RESET
RESET DIRECTION
Stabilizer
%
CLOSECLOSE
%
PLAYBACK
DECK A
Cassette
RECORD/PLAYBACK
DECK B
StabilizerCassette
MIN MAX
23
1
STANDBY/ON
PHONES
RESET
!
45
⁄
&