Filter
Top Products
5
ENGLISHFRANÇAISDEUTSCHSVENSKAITALIANOESPAÑOLDUTCH
PLAY
LINE IN-LINE OUT
L
R
TAPE PBREC OUT
L
R
3
REC
4
CONNECTIONS
To an AC outlet
NOTES ON THIS MANUAL
In this manual, the main operation buttons of the front panel are indicated based on DECK B when the operation is common to
both DECKs A and B. Since the locations of the buttons of DECK A and DECK B are the same, you can easily find the desired
button even when operating DECK A.
Main operation buttons of DECK A
(U.S.A. model)
Amplifier or receiver
REAR PANEL CONNECTIONS
Make sure that power to both the deck and your amplifier/receiver is turned off
before making any connections.
÷ The White plug on the paired connecting cables corresponds to the Left
channel and the Red plug corresponds to the Right channel. Make sure that
the left and right channel connections are properly made, and that the plugs
are inserted firmly.
÷ The LINE OUT/PLAY jacks on the deck should be connected to the TAPE PB
(Playback/Input) jacks on your amplifier/receiver, and the LINE IN/REC jacks
on the deck should be connected to the REC OUT (Recording/Output) jacks
on your amplifier/receiver.
÷ The LINE OUT terminals on this unit are numbered 3 and the LINE IN jacks
are numbered 4. When connecting this unit to a YAMAHA amplifier or
receiver whose terminals are numbered 1, 2, 3, 4 ... (etc.), connect this
unit's LINE OUT terminals to the input terminals numbered 3 and connect this
unit's LINE IN terminals to the output terminals numbered 4 on the rear panel
of the amplifier or receiver.
÷ Connect the power cord to an AC wall outlet or to an AC outlet on the rear
panel of your amplifier/receiver (if provided).
NATURAL SOUND CASSETTE DECK K-903
DOLBY NR
OFF/ B/ C
REC LEVEL
PHONES
STANDBY/ON
MODE
O / p / ∏ / RELAY
PLAYBACK
DECK A
Stabilizer
RECORD/PLAYBACK
DECK B
MIN MAX
CassetteStabilizerCassette
CLOSE
% %
CLOSE
DIRECTION RESETRESET DIRECTION
! ⁄
&
SEARCH
!⁄
&
MUTE/SEARCH
REC/PAUSE
PLAYPLAY
EJECT EJECT
NORMAL HIGH
DUBBING A # B
Main operation buttons of DECK B