Filter
Top Products
6
PLAYBACK (Common to DECKs A and B)
Preparation for playback
÷ Turn on the POWER switch.
÷ Set your amplifier or receiver to cassette deck function mode.
To stop playback
Press the STOP button. To remove the cassette tape, press
the EJECT button. The cassette compartment door opens.
To turn off the power, press the POWER button.
To fast forward or rewind the tape
When the tape running indicator # is lit:
Pressing the ⁄ button fast forwards the tape while
pressing the ! button rewinds the tape.
When the tape running indicator @ is lit:
Pressing the ! button fast forwards the tape while
pressing the ⁄ button rewinds the tape.
Basic operation - To play back a cassette tape
KX-W582
KX-W482
615
s
DECK B
DECK A
4
PHONES
2
!/⁄
7
RESET
STOP
s
DECK B
DECK A
6115
4
PHONES
2
!/⁄
7
RESET
STOP
POWER = ON
POWER = ON
3
1
1
EJECT
Insert the cassette with the
exposed tape side facing
down. (The side facing you is
called the forward side and
the opposite side is called the
reverse side.) To close the
compartment, push in the
compartment door until it
locks shut.
2
DECK A/B
Press the DECK
A/B button to
select the deck to
be operated. The
corresponding
indicator lights on
the display.
4
=
+
DOLBY NR
Refer to the following
description.
5
+
=
MODE
“”
RELAY
Refer to the following
description.
6
DIRECTION
A B
Select the tape running direction
for DECK A or B. Each time this
button is pressed, the tape running
direction changes between forward
(#) and reverse (@), and the
corresponding indicator lights on
the display.
7
PLAY
3
KX-W582 only
DSS
DSS MODE
Refer to the following
description.
OFF
B
C