Yamaha HTR-6140 Stereo Receiver User Manual


 
50 En
XM Satellite Radio tuning
You can display the XM Satellite Radio information (such
as channel number, channel name, category, artist name,
or song title) for the currently selected channel in the front
panel display or in the OSD.
If a status message or an error message appears in the front panel
display or in the OSD, see the “XM Satellite Radio” section in
“Troubleshooting” on page 82 for appropriate remedies.
Displaying the XM Satellite Radio
information in the front panel display
Press
H
INFO (or
A
INFO) repeatedly to toggle
between the following XM Satellite Radio
information display modes.
When the channel number / name is displayed:
When the channel category is displayed:
When the artist name / song title is displayed:
y
The front panel display can indicate up to 14 alphanumeric
characters at once. You can set whether to display the XM
Satellite Radio information in the front panel display in a
continuous manner or by 14 alphanumeric characters at once by
using the “FL SCROLL” parameter in “OPTION MENU” (see
page 70).
If the XM Satellite Radio information contains a character that
cannot be recognized by this unit, the character will be
displayed with a space.
To hold the current XM Raido information, press
8
ENTER on
the remote control while it is being displayed. Press
8
ENTER
again to release the held information.
When the antenna of the XM Mini-Tuner Dock cannot receive
the signals, “NO SIGNAL” appears in the front panel display.
Displaying the XM Satellite Radio
information in the OSD
Press
ODISPLAY
.
The following screen is displayed in the OSD.
[1] Search mode (see page 48)
[2] Channel category
[3] Song title
[4] Channel number/name
[5] Artist name
y
To turn off the OSD, press
ODISPLAY
again.
XM status messages also appear in the OSD.
You can select the amount of time the XM Satellite Radio
information is displayed in the OSD by using the
“OSD-SOURCE” parameter in “OPTION MENU” (see
page 70).
To hold the XM Satellite Radio information, press
8
ENTER
on the remote control while it is being displayed in the OSD.
The HOLD indicator flashes in the front panel display while
you are holding the XM information. Press
8
ENTER again or
change the XM Satellite Radio channel to release the held
information.
Displaying the XM Satellite Radio
information
Note
Channel number/name
Channel category
Artist name/song title
[043] XMU
<CAT>ROCK
Coldplay / Clo
XM INFORMATION
ALL CH SEARCH
XM : 043
CHAN : XMU
CAT : Rock
NAME : Coldplay
TITLE : Speed of sound
.(Spe / Coldplay)
[ ]/[ ]: CHANNEL
[ ]/[ ]: CATEGORY
[
[
[1]
[2]
[4]
[5]
[3]
01EN_HTR-6140_U.book Page 50 Friday, February 1, 2008 2:26 PM