Yamaha HTR-6030 Stereo Receiver User Manual


 
22 En
Basic setup
7 Press
G
n to select “SET” and then
G
l / h
to select the desired setting.
SET >CANCEL
Choices: SET, CANCEL
Select “SET” to apply the settings you made.
Select “CANCEL” to cancel the setup procedure
without making any changes.
y
You can also press
P
MENU to cancel the setup procedure.
8 Press
G
ENTER to confirm your selection.
If you selected “SET” in step 7, each speaker outputs
a test tone twice in turn. “CHECK:TestTone” appears
in the front panel display for a few seconds and then
“CHECK OK?” appears in the front panel display.
y
Check the speaker connections (see page 5) and adjust the
“SPEAKERS” settings back in step 6, if necessary.
The indicator of the speaker currently outputting the test
tone flashes in the front panel display.
9 Press Gl / h to select the desired setting.
Choices: YES, NO
Select “YES” to complete the setup procedure if
the test tone levels from each speaker were
satisfactory.
Select “NO” to proceed to the speaker level
adjustment menu to balance the output level of
each speaker.
10 Press
G
ENTER to confirm your selection.
If you selected “YES” in step 9, the setup
procedure is completed and the display returns to
the top set menu display.
If you selected “NO” in step 9, the front speaker
level adjustment display appears in the front panel
display.
11 Press Gk / n to select a speaker and then
Gl / h to adjust the balance.
The selected speaker and the front left speaker (or the
surround left speaker) output a test tone in turn.
•Press h to increase the value.
•Press l to decrease the value.
FR ----||----
Select “FR” to adjust the balance between the front
left and right speakers.
Select “C” to adjust the balance between the front
left and center speakers.
Select “SL” to adjust the balance between the front
left and surround left speakers.
Select “SR” to adjust the balance between the
surround left and surround right speakers.
Select “SW” to adjust the balance between the
front left speaker and the subwoofer.
The available speaker channels differ depending on the
setting of the speakers.
12 Press
P
MENU to exit from “BASIC SETUP”.
CHECK:TestTone
CHECK OK?
..
YES
Note