E-12
CONNECTIONS
Connecting external components
(See figure 8 on page 88.)
This unit can be connected with external audio and video
components. Make connections between this unit and other
components using RCA pin plug connector cables correctly,
that is to say L (left) to L and R (right) to R. Also, refer to the
owner’s manual for each component to be connected to this
unit.
AC OUTLET (UNSWITCHED)
(General model only)
The power cord of any audio/video unit can be connected to
this outlet.
The power to this outlet is not controlled by this unit’s
STANDBY/ON switch . This outlet will supply power to the
connected unit even if this unit is in the standby mode.
The maximum power that can be connected to this outlet is
100 watts
Connecting the AC supply lead
•
After completing all connections, plug the AC supply lead
into a convenient AC outlet.
•
Unplug the AC supply lead from the AC outlet if the unit is
not to be used for a long period of time.
SPEAKERS
CENTER/REAR
SPEAKERS
FRONT
MAINS
R L
CENTERREAR REAR
REAR SINGLE
CENTER :6
Ω
MIN./SPEAKER
6
Ω
MIN./SPEAKER
SEE OWNER’S MANUAL FOR CONNECTION.
SEE OWNER’S MANUAL FOR CONNECTION.
REAR
:4
Ω
MIN./SPEAKER
REAR SINGLE
:8
Ω
MIN./SPEAKER
RL
L
TAPE
/
MD
R
IN OUT
AC OUTLET
UNSWITCHED
100W MAX.
VOLTAGE
SELECTOR
To AC outlet
SPEAKERS
CENTER/REAR
SPEAKERS
FRONT
MAINS
R L
CENTERREAR REAR
REAR SINGLE
CENTER :6
Ω
MIN./SPEAKER
6
Ω
MIN./SPEAKER
SEE OWNER’S MANUAL FOR CONNECTION.
SEE OWNER’S MANUAL FOR CONNECTION.
REAR
:4
Ω
MIN./SPEAKER
REAR SINGLE
:8
Ω
MIN./SPEAKER
RL
L
TAPE
/
MD
R
IN OUT
AC OUTLET
UNSWITCHED
100W MAX.
VOLTAGE
SELECTOR
AC OUTLET (UNSWITCHED)
(General model)
(General model)