Yamaha DVX-S100 Home Theater System User Manual


 
13
SPEAKER SETUP
PREPARATION
English
3 Hang the holes on the protruding screws.
Make sure that the screws are securely caught by
the narrow parts of the holes.
You can use the lower holes on the rear of the
front/rear speakers.
Cautions
Each speaker weighs 1.1 kg (2 lbs. 6 oz.). Do not mount them
on thin plywood or a wall with soft surface material. If
mounted, the screws may come out of the flimsy surface and
the speakers may fall. This damages the speakers or causes
personal injury.
Do not install the speakers to a wall with nails, adhesives, or
any other unstable hardware. Long-term use and vibrations
may cause them to fall.
To avoid accidents resulting from tripping over loose speaker
cables, fix them to the wall.
Select a proper position on the wall to mount the speaker so
that no one will injure his/her head or face.
60 mm
60 mm
If you want to mount a speaker
on a commercially available
speaker stand (for the front/rear
speakers)
The screw holes (at an interval of 60 mm) on the bottom
and the rear of the speaker can be used to mount the
speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
60 mm
Front/rear speaker
(bottom)
60 mm
Front/rear speaker
(rear)