Filter
Top Products
DVD SETUP MENU OPTIONS
34 En
■ Video setup
TV type
Use this feature to select a color system that matches
your TV. For details, see “Setting a TV type and
display” on page 19.
[VIDEO SETUP PAGE] - [TV TYPE]
Setting the TV display
Set the aspect ratio of this DVD receiver to match your
TV. The format you select must be available on the
disc. Otherwise, the TV display setting will not affect
the picture during playback.
[VIDEO SETUP PAGE] - [TV DISPLAY]
4:3 PAN SCAN
Select this if the aspect ratio of your TV is 4:3 and you
want both sides of the picture to be trimmed or
formatted to fit your TV screen.
4:3 LETTER BOX
Select this if the aspect ratio of your TV is 4:3. In this
case, a wide picture with black bands on the upper and
lower portions of the TV screen are displayed.
16:9
Select this if you have a widescreen TV.
The following shows the relationship between the
setting of this DVD receiver and the TV display.
When the aspect ratio of your TV is 4:3:
When the aspect ratio of your TV is 16:9 (widescreen):
*1: If the disc is not assigned to playback with panscan, it is
played with letterbox.
*2: The side of the picture may be stretched depending on the
TV. In this case, check the screen size and aspect ratio of
your TV.
Progressive function
This feature is only valid if you have connected this
DVD receiver to a progressive scan TV through the
component video jacks (see “Connecting a TV” on
page 12).
[VIDEO SETUP PAGE] - [PROGRESSIVE]
ON
Select this to enable the progressive scan function.
OFF
Select this to disable the progressive scan function.
– Ensure that your TV is equipped with progressive scan.
– Connect using a component video cable.
– If no picture is displayed, wait for 15 seconds for this
DVD receiver to activate automatic recovery.
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
HDMI SETUP
VIDEO SETUP PAGE
Setting
Playback
disc
TV display
4:3 PAN
SCAN
4:3 LETTER
BOX
16:9
4:3
16:9
4:3
*1
Notes
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
VIDEO MONITOR COMPATIBILITY WITH THIS MODEL
525P AND 625P DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
This DVD receiver is compatible with the complete line of
YAMAHA products, including the projectors DPX-1300, DPX-
830 and the plasma monitor PDM-4220.
16:9
16:9
4:3
Setting
Playback
disc
TV display
*2
01EN_DVX-C310_UC.book Page 34 Monday, July 10, 2006 11:22 AM