Filter
Top Products
CONNECTION
17 En
English
PREPARATION
2
■ Connecting the FM/AM antennas
1 Connect the supplied AM loop antenna to the AM
ANT terminal. Place the AM loop antenna on a shelf
or attach it to a stand or wall.
2 Connect the supplied FM wire antenna to the FM
ANT terminal. Extend the FM wire antenna and fix its
ends to the wall.
– Adjust the position of the antennas for optimal reception.
– Place the antennas as far as possible from your TV, VCR
or other sources of radiation to prevent unwanted
interference.
– The AM loop antenna should be placed away from this
DVD receiver.
– A properly installed outdoor antenna provides clearer
reception than an indoor one. If you experience poor
reception quality, an outdoor antenna may improve the
quality. Consult the nearest authorized YAMAHA dealer
or service center about outdoor antennas.
Notes
TV IN
ANTENNA
AUX IN
LINE OUT
XMHDMI
GND
AM
L
R
1
2
Ground (GND terminal)
For minimum interference,
connect the antenna GND terminal
to a good earth ground. A good
earth ground is a metal stake
driven into moist earth.
FM wire
antenna
AM loop
antenna
01EN_DVX-C310_UC.book Page 17 Monday, July 10, 2006 11:22 AM