Filter
Top Products
XM® SATELLITE RADIO TUNING
43 En
TUNING OPERATION
4
English
■ Activating XM Satellite Radio
To sign up for an account with the XM Satellite Radio
service, an XM Satellite Radio ID number is required.
Follow the procedure below to check your ID number,
and then visit the website or call toll-free with a major
credit card handy for signing up.
For residents in the United States
URL: http://activate.xmradio.com/
Toll-free: 1-800-XM-RADIO (1-800-967-2346)
For residents in Canada
URL: https://activate.xmradio.ca/on-line-activation/
activation.jsp
Toll-free: 1-877-GET-XMSR (1-877-438-9677)
1 Press XM repeatedly until “XM RADIO” appears in
the front panel display.
2 Press and hold DISPLAY to check the XM Satellite
Radio reception level.
→ “ANTENNA XX” appears (XX: reception level,
0 to 100%).
• Check the XM Satellite Radio reception level and
adjust the orientation of XM Passport System for a
better percentage of the reception level.
If “ANTENNA” appears in the front panel display, the XM
Passport System may not be connected to the XM jack on the
rear panel of this DVD receiver properly. See “Connecting
XM Passport System” on page 41 and check the connection.
3 Press CH+ ( )/CH– ( ) to select channel “0”.
→ “RADIO ID” appears in the front panel display for
few seconds, and then the Radio ID number appears.
You cannot select channel “0” if the All Channel Search
mode (see page 44) is not selected.
4 Check the XM Radio Satellite Radio ID number
displayed in the front panel display and write it down.
ID:_____________________________________
■ Basic XM Satellite Radio
operations
1 Press XM repeatedly until “XM RADIO” appears in
the front panel display.
2 Press DISPLAY.
→ The XM Satellite Radio information (such as
channel number, channel name, category, artist name,
or song title) for the currently selected channel
appears in the front panel display.
3 Search for a channel by using one of the XM Satellite
Radio search modes (see page 44).
– When you select “XM” as the input source, this DVD
receiver automatically recalls the previously selected
channel.
– The XM Satellite Radio signals can be output at the LINE
OUT jacks.
– You can set the XM Satellite Radio preset channels (see
page 45).
– You can display the XM Satellite Radio information in
the front panel display (see page 45).
Note
Note
Notes
01EN_DVX-C310_UC.book Page 43 Monday, July 10, 2006 11:22 AM