Filter
Top Products
LISTENING TO FM BROADCASTS
48 En
Notes
– Any stored station data existing under a preset
number is cleared when you store a new station
under the same preset number.
– If the number of received stations does not reach
40 (A1 to E8), automatic preset tuning
automatically stops after searching for all the
available stations.
Manual station preset
Use this feature to store the radio stations manually.
1 Tune into a station.
Refer to “Basic tuning operation” on page 46 for the details.
2 Press MEMORY.
The MEMORY indicator flashes in the front panel
display for approximately 30 seconds.
Press MEMORY again to cancel while the MEMORY
indicator is flashing.
3 Press A-E/CAT. / repeatedly to select a preset
group (A to E) while the MEMORY indicator is
flashing.
The selected preset group appears.
4 Press PRESET/CH / to select a preset
number (1 to 8) while the MEMORY indicator is
flashing.
5 Press MEMORY to confirm the preset.
After “A1:PRESET OK” appears in the front panel
display, the frequency appears with the preset group
and number you selected. The MEMORY indicator
disappears from the front panel display.
If the desired station is not stored, or a station is not
stored to the desired preset group and number, preset
the station manually. Refer to Manual station preset for
details.
A :FM 88.9 MHz
Flashes
A :FM 88.9 MHz
Flashes
Preset group
A1:FM 88.9 MHz
Flashes
Preset number
A1:PRESET OK
A1:FM 88.9 MHz
The displayed station has been stored as A1.