Yamaha CRW4261t CD Player User Manual


 
Chapter 2 - Installing the Yamaha CRW4261t Drive
10
AUDIO cable
8. Connect the power supply cable.
Connect the +12V and +5V 4-pin power cable to the power supply
interface located on the rear panel of the CRW4261t drive.
The shape of the connector makes it impossible to reverse the connec-
tions.
If you have difficulty when inserting the connector, try wiggling the
connector left and right while inserting it.
To the CRW4261t
4-pin connector (large)
To the CDR100/102
(3-pin connector)
* Simultaneous use with the
CRW4261t is is not possible.
To the Sound Card (Sound Blaster compatible)
4-pin connector (small)
D
C IN
PU
T
15V
+
12V
+
G
R
G
L
A
UD
IO
O
U
T
CSEL
SLAVE
M
ASTER
IDE
INTERFACE
CONNECTOR
1