Filter
Top Products
6
XMR6910 OPERATION
General Operation
When in AM/FM, CD or AUX mode:
Press DISP to select between clock and radio frequency (tuner
mode), clock and CD elapsed time/track (CD mode), or clock
and AUX (AUX mode).
When in XM Radio mode:
Press DISP to select between channel name, artist name,
song title or clock.
With the unit on, press and hold DISP until clock begins to
flash, then release. Press TUNE
nn
to adjust the hours and
TUNE
ll
to adjust the minutes. Press DISP momentarily to
save the selected time.
The clock will display 12-hour time in U.S. frequency spacing
mode (PM 10
:
00). In European frequency spacing mode, the
clock will display 24-hour time (22
:
00).
In AM/FM tuner mode, press and hold DISP then press
TUNE
ll
to select function priority display. “FREQ” will
momentarily appear in the display.
Note: "FUNC" will appear in XM, CD or AUX modes.
Radio frequency (tuner mode), XM information (XM mode),
CD elapsed time/track (CD mode) or AUX (AUX mode) will
be displayed by default.
Clock is accessed by pressing DISP momentarily.
Press and hold DISP then press TUNE
nn
to select time
display priority. “TIME” will momentarily appear in the
display. Clock will be displayed by default. Radio frequency,
XM information, CD elapsed time/track or AUX is accessed by
pressing DISP momentarily. Time display priority is not
available in XM DIRECT band.
Programs unit to display clock/no clock when unit is off.
Press and hold MODE then press PRESET 1 to select clock
priority on/off.
Press and hold for more than 2 seconds to RESET the unit
upon initial installation or if abnormal operation occurs.
The reset button is located behind the faceplate.
Display
Set the Clock
12/24-hour Clock
Programmable Display
Priority
Programmable Clock
Priority
Reset