Filter
Top Products
5
XMR6910 OPERATION
General Operation
Press RELEASE and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push
left side to secure.
Remove trim ring and install supplied Phillips head #1 screw
through left side of mounting frame into faceplate.
Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
Press MODE to select between AM/FM, *XM Radio, CD and
auxiliary input. Modes of operation are indicated in the
display.
*Optional XM Satellite Radio Receiver and subscription
required for XM Radio operation.
Adjust volume using rotary encoder (00-46).
Press and hold POWER for 3 seconds to program currently
selected volume level. "ON VOL" and the current volume
level will momentarily appear in the display.
Press SHIFT for 2 seconds to activate the SHIFT function.
The SHIFT icon will appear in the display. In XM Radio mode,
the SHIFT function must be active to access the LOUDNESS
and EQ functions.
Press SHIFT again for 2 seconds to cancel.
Note:
The SHIFT function only applies to XM Radio operation.
Press LOUD to activate and deactivate loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK
and OFF (default) equalization curves. Any adjustment to the
Bass or Treble settings automatically cancels the current EQ
curve (if one is selected).
Faceplate Removal
Semi-permanent
Faceplate Installation
Power On/Off
Mode
Volume
Programmable
Turn-On Volume
Shift Function
Loudness
Preset EQ Curves