Filter
Top Products
7
Modulator frequency setting
1. Press and hold the DISP SETUP for 2 seconds or more.
2. Turn the rotary encoder or press the 6 or 5 button to select the frequency
setting mode (displays the frequency of the desired modulation station).
3. Press the 7 or 8 button to set the frequency.
4. The frequency is varied by 200kHz (0.2MHz) steps from 87.7 to 89.9 MHz.
5. Press the DISP SETUP button to return to normal mode.
Note: In order to resume normal AM and FM radio reception, turn the power of the XM radio display
module off. Press and hold the SOURCE POWER button for 2 seconds or more
Initial Setup
7
8
SOURCE / POWER
Rotary Knob
DISP/SETUP
Up
Down
5
6