Filter
Top Products
- 8 -
MD-606T REMOTE CONTROL FEATURES
Figure 3. MD-606T Remote Control Features
1. Numeric Buttons – Press to enter a three digit number to call up specific
stations (in ‘D’ tuning mode), or to select stored preset stations (after
selecting ‘A’ or ‘B’ preset bank). Preset programming and selection is
described in a subsequent section.
2. XM Button – Not used for regular operation.
3. Presets (A, B and D (direct) Buttons) – Press to select ‘A’ or ‘B’ bank of
presets, then press the Numeric buttons to call up your preset stations, or
press and hold one of the Numeric buttons to store the currently tuned
channel to a preset location. Select ‘D’ for direct tuning with a three digit entry
of the Numeric Buttons followed by a press of the Select Button. ‘A’, ‘B’ and ‘D’
status is displayed in the lower left corner of the Display. Up to 20 Preset
stations are programmable (10 in bank ‘A’, 10 in bank ‘B’).
4. Power On/Off Switch – Press to turn MD-606T ON/OFF. NOTE: The remote
will only put the MD-606T into Standby Mode. To completely shut-down the
device (and turn off the LCD screen), the front panel Power button must be
used. It is recommended that you completely shut-down the MD-606T when a
long time period is expected between listening sessions.