Filter
Top Products
Deleting IR Commands and Macros
17. Delete a Single IR command (must be in EDIT mode): Press and release the DELETE button. The PROGRAM
LED will blink once indicating that the IR command was deleted.
18. Delete a Macro: Press and hold (approximately 2 seconds) the DELETE button until the SOURCE (active Source)
blinks once. The PROGRAM LED will blink once indicating that the Macro was deleted.
19. Delete All Macros: Press and hold (approximately 4 seconds) the DELETE button until the SOURCE (active Source)
blinks twice. The PROGRAM LED will blink once indicating that all Macros were deleted.
Quick Start Manual, ISM4 Intelligent System Manager
© 2008 Xantech Corporation, Document #08905137D