Filter
Top Products
TYPICAL SYSTEM CONNECTIONS
ISM4 INTELLIGENT SYSTEM MANAGER
PROGRAMMING QUICK START GUIDE
Front
Rear
This ISM4 Programming Quick Start Guide provides the basic instruction to programming an ISM4. To use the Quick Start Guide, fill
out the Macro Programming Table and follow the Programming Instructions. For complete instructions on installation, connections and
additional programming capabilities, refer to the ISM4 Installation & Programming Manual.
The System shown on the back cover illustrates a typical Home Theater System. In the configuration as shown, when the TV is turned
ON, the ISM4 will sense the TV ON state, look at Sources 2-4 (A/V Receiver, Cable Box and DVD Player) and if any of them are OFF,
automatically output the Source ON Macros for those devices to turn them ON. If at any time, while the TV is ON, any of Sources 2-4
turns OFF, the ISM4 will automatically turn it back ON. When the TV is turned OFF, the ISM4 will sense the TV OFF state, look at
Sources 2-4, and if any of them are ON, automatically output the Source OFF Macros for those devices to turn them OFF.
There are endless applications for this type of power management. Two other system examples are shown in the ISM4 Installation &
Programming Manual for reference. See Section: System Applications.