Filter
Top Products
The Xantech 1X2 Splitter for HDMI 1.3
The Xantech 1X2 Splitter for HDMI 1.3 allows set-top boxes, DVD players, Blu-
ray players and other HDTV devices with HDMI outputs to be connected to up
to two HDTV displays (or more if multiple splitters are utilized in place of HDTV
displays).
How It Works
The Xantech 1X2 Splitter for HDMI 1.3 is a distribution hub that sends the
same HDMI signals to two HDMI-compatible digital display devices. An HDMI
video source is connected to the input jack on the 1X2 Splitter for HDMI 1.3.
HDMI-compatible displays are connected to each of the HDMI outputs on the
1X2 Splitter, and beautiful, sharp HDMI video will then emerge on all of your
connected displays.
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE XANTECH 1X2 SPLITTER FOR HDMI 1.3
By default, display information from the display connected to HDMI output port 1 is •
sent back to the source. Therefore, the other display connected to the 1X2 Splitter
for HDMI 1.3 must be capable of accepting the timings and resolutions of the
display that is connected to HDMI output port 1. It is recommended that the display
with the lowest native resolution be connected to HDMI output port 1. This is to
ensure that a compatible video signal will be able to be displayed on all connected
monitors. There is a generic EDID programmed into the 1X2 Splitter for HDMI 1.3
that can be used instead. Please see page 5 for more details.
The Xantech 1x2 Splitter for HDMI 1.3 is HDMI/HDCP compliant and is •
compatible with all HDMI and DVI* displays.
*When used with a DVI-to-HDMI cable or adapter
-1-
INTRODUCTION