Wharfedale Sub A15 Speaker User Manual


 
ENCLOSURE FEATURES
-Custom 15” Low Frequency driver provides exceptional low-end clarity, high power
handling capability and maximum efficiency
-Rugged, textured grey, painted 18mm, 13 ply birch plywood enclosure with two
rubberized over-molded handles on the sides and four screw mounted rubber feet on
the bottom of the enclosure.
-Integral pole mount adapter for the mounting of speaker enclosures above the
subwoofer.
5
Titan Sub-A15 DESCRIPTION
The TITAN Sub-A15 is powerful 15 inch band pass active subwoofer. A built-in 400
watt (continuous) 600 watt (peak) amplifier conveniently accepts stereo or mono line
level inputs via dual, balanced, XLR-¼” “combo” connectors as well as a unique single
channel 4 speaker level input via a ¼” phone jack which allows for use with a
standard sound reinforcement amplifier (when the internal amplifier is not used).
A custom designed, down-firing, aluminium cast frame 15" woofer, with a 3" voice coil,
is utilized as the heart of the Titan Sub-A15's complementary low frequency
enhancement system. Integral signal processing includes a dynamic AGC (Automatic
Gain Control) circuit, a stereo crossover and signal limiting for the prevention of a
distorted signal to the internal amplifier. A convenient and an essential PHASE switch
is included to allow for proper subwoofer signal polarity to be selected.
A pair of balanced XLR male output connections, with switchable “High-Pass” mode
are available for the stereo line level outputs and may be used to pass through mono
or stereo signals from the inputs to another system or to send a high-pass, line-level
stereo signal to a pair of powered, full-range speakers such as the popular Wharfedale
Pro Titan ACTIVE models.