Filter
Top Products
™
WARNING AND SAFETY INSTRUCTIONS
1. READ INSTRUCTIONS carefully before operating this product.
2. RETAIN these instructions for future reference.
3. COMPLY WITH WARNINGS – All warnings and instructions for this product
should be adhered to.
4. SETUP PROCEDURES – In order to avoid speaker damage, it is advisable to
establish and follow a pattern for powering on and off a sound system. Make sure that
all input and output level controls are at their minimum settings on all components of
the system. With all system parts connected, power on source equipment (playback
units, instruments, mixers, signal processors, etc.), BEFORE powering on any
amplifiers or powered speakers. Power on the system’s amplifier(s) or powered
speakers LAST. Wait until all system components have stabilized, then bring up
volume controls to operating level. Similarly, when shutting a system down, always
turn down all level controls and then turn off the amplifier(s) or powered speakers
BEFORE shutting down other system components.
5. CABLES – Be sure to use proper cables for all connections.
6. RIGGING – SUSPENDING – MOUNTING IS NOT RECOMMENDED FOR
THIS PRODUCT! The rigging, suspension or mounting of any speaker system can
expose members of the public to serious health risks and even death. UNDER NO
CIRCUMSTANCES ATTEMPT TO RIG, SUSPEND OR OTHERWISE MOUNT
SPEAKERS UNLESS YOU ARE FULLY QUALIFIED AND CERTIFIED TO DO SO
BY RELEVANT LOCAL, STATE AND NATIONAL AUTHORITIES. ALL RELEVANT
SAFETY REGULATIONS MUST BE FOLLOWED. IF YOU ARE NOT PROPERLY
QUALIFIED OR DO NOT KNOW OF PERTINENT REGULATIONS, CONSULT
QUALIFIED PERSONNEL FOR ADVICE AND ASSISTANCE.
7. CAUTION – These professional loudspeaker systems are capable of
generating very high sound pressure levels. Use care with placement and operation to
avoid exposure to excessive sound levels that could cause permanent hearing
damage.
8. SERVICING – The user should not attempt to service this product. Please
contact your local Wharfedale Pro Service Center.
UNPACKING
All Wharfedale Pro products are fully checked before leaving the factory. After
unpacking, inspect the contents for any physical damage. Retain the shipping carton
and internal packing material. Check as soon as possible that the unit is functioning
properly. In the event of any shipping damage, please contact your dealer and the
shipper immediately to make a claim.
1