Filter
Top Products
GENERAL OPERATING INSTRUCTIONS
Make sure that the power switch is set to the OFF position while making connections to and from
the power amplifier. Connect all external components. Speakers, Microphones, instruments, etc.
Check for secure connections.
Turn all level controls down on mixers, amplifiers and signal processing devices.
Connect the A/C power cord to the power outlet of the amplifier.
After powering up all other devices first, turn the power switch on the amplifier to the ‘ON’ position
and verify that the POWER LED is lit.
Turn the amplifier volume control up to the “7” setting. (This setting can be adjusted higher or lower,
as needed, after set-up).
With the source signal present (a person singing in to a microphone or and instrument playing),
adjust the various signal levels as needed. Make any needed overall volume adjustments with the
volume control on the mixer and the amplifier. When powering down, make sure any external power
amps are switched off first.
14
S-SERIES Professional Amplifiers
MICROPHONES
S-SERIES AMPLIFIFER
SPEAKER A SPEAKER B
MIXER
BASIC STEREO SOUND SYSTEM HOOKUP
INPUT B
MODEL S-SERI ES
Professional P ower Amplifie r
WWW.WHARFEDALEPRO.COM
A
B
MIXER
OUTPUTS
AMP
INPUTS
AMP
OUTPUTS