Filter
Top Products
BINDING POST WIRING OPTIONS
11
As shown in the graphic above, the stereo and bridged mono applications can be connected as
indicated. Binding post wiring can be done with spade connectors, bare wire ends tightened into
the binding posts or via banana plugs inserted into the end of the binding posts.
BRIDGE
CONNECTING BARE ENDED SPEAKER CABLE LEADS
NEGATIVE
LEAD TO
SPEAKER
POSITIVE
LEAD TO
SPEAKER
Strip away approximately ½” (12mm) of insulation from the speaker wire. Twist the bare copper wire
ends tightly. Unscrew each binding post, insert the wire into the hole in the metal portion of the binding
post and tighten the binding post securely. Be care of stray wire strands that could cause shorts.
S-SERIES Professional Amplifiers
BRIDGED
MONO
B
BRIDGE
A
+
_
A