Filter
Top Products
L3-16 User Guide
10
The Threshold fader is located on the Input Meter, allowing easy adjustment with reference to input
energy. Note that the Input Meter displays the signal level after the Paragraphic EQ processing to allow
accurate Threshold setting. Below the Input Meter, you will find Waves standard peak indicators. Click
the peak indicator field to reset.
Out Ceiling/Output Meter
- Range -30dB to 0dB
- Default 0dB
The Out Ceiling fader sets maximum output level, scaling the output signal to reach the out ceiling
value but not exceed it.
The Out Ceiling fader is located on the Output Meter. Below the Output Meter are Waves standard
peak indicators. Click the peak indicator field to reset.
Threshold/Out Ceiling Link
The button lets you adjust the Threshold and the Out Ceiling faders simultaneously, allowing
threshold setting changes while monitoring the limiter effect without its makeup gain action.
Attenuation Meter
- Range -30dB to 0dB
The Attenuation Meter displays the overall (wideband) attenuation.
Release
- Range x0.1 to x10.0
- Default x1.0
The Release value is a multiplier for the L3-16’s internal release time constants, as set by the Release
Character. It proportionately shortens or lengthens each band’s release values; lower values result in
shorter release times; higher values result in longer release times.
Release Character
The Release Character menu contains factory settings for L3-16’s ARC (Auto Release Control)
engine, controlling limiter release behavior across the 16 bands. We strongly recommend that you
experiment with the different types, as they offer a wide variety of flavors that significantly affect the
sound.
Release Characters:
Default
Warm Analog
Warm Classical
Overall Punch
Drums Punch