Filter
Top Products
The Wadia 830 is a modular design.
It can be equipped with any combination of the following options:
l Digital Inputs
l Digital Outputs
l
PHAST component interface control card
The standard version of the Wadia 830 is not equipped with these options, but any of them can
be added
-
either at the time of purchase, or at a later date. If you are interested in adding any
of these options, consult your dealer.
Digital Inputs allow you to decode other digital sources and receive all the benefits of Wadia’s
decoding performance. The
Wadia
830 Digital Input card has the following inputs:
Input 1: Glass-fiber optical
Input 2: Coaxial with BNC connector
Input 3: Coaxial with BNC connector
Input 4: Plastic-optical
TOSLINK
Any of the inputs will automatically adjust to the sampling rate, 32 KHz, 44.1 KHz or 48 KHz
when connected to any standard digital audio output.
To select a different input, use the INPUT button on the remote control. The input select is a
scrolling feature. For example, while listening to CD, pressing the input select button will switch
to input 1. Pressing again will switch to input 2, and so on. After input 4, pressing again will
switch back to CD.
The Wadia 830 can be equipped with the optional digital outputs to allow the internal CD
transport to feed another component, such as a digital tape recorder. The configuration for the
digital output card is as follows:
Output 1: Glass-fiber optical
Output 2: Coaxial with BNC connector
The digital output signal is active on both outputs when a CD is playing in the transport.