Filter
Top Products
11
Remote Control Operation
The Wadia 30 Key Remote Control requires two type-AAA batteries, which you will find in the accessories kit.
To install the batteries, remove the battery cover on the back of the remote by sliding it towards the bottom of
the remote. Insert the batteries as indicated on the battery holders.
Volume – /+
Whenever the volume control buttons are pressed, the volume for both channels will be increased or decreased
by an increment of 1 on the display screen. The range of the volume control is from 0 to 100, with each step
representing 0.5 dB change in volume.
Balance
L R
Relative volume of each channel can be adjusted via the balance control buttons on the remote. Pressing one
of the balance buttons increases the volume on that channel relative to the other by an increment of 0.2 on the
display. This corresponds to a 0.1dB change. The next time the button is pressed the opposite channel is decreased.
This way the overall volume level (the sum of the two channels) remains constant within 0.1dB.
Input
Inputs can be selected from the remote control by pressing the input button. Each time the input button is
pressed, the next input is selected. For example, if you are listening to Input 1 and you press the input select Input
2 will be selected, press it again, and Input 3 will be selected and so on. After the last input has cycled through,
the list will begin again with the internal drive.
Whenever you select a new input, the display will switch to the Input Screen.
1
23
456
78
0
mute
d
isplayL R
p
r
o
g
r
a
m
phase enter
mode
input
▼
■
▼
▼
▼
▼
❙
▼
▼
❙
▼
❙
❙❙
▼
▼
9
✚
❙
Balance Left-Right
Phase Invert / Enter
Program / Mode
Key Pad
Search Back
Stop / Volume Up
Track Back / Mute
Drawer Open-Close
Display On-Off
Input
Repeat
Search Forward
Play
Track Forward
Volume Down / Pause