Filter
Top Products
10
Connecting to AC Power
Check to make sure your Wadia 3
33
302 CD Player has been
manufactured for operation at your AC line voltage. Attempting to use
your Wadia 3
33
302 CD Player at any voltage other than that specified on
the rear of the unit may cause damage that is not covered by Wadia’s
warranty.
Using AC Line Conditioners
Of the wide range of power line conditioners currently available, some
can provide substantial improvement in sound while others actually
degrade sonic performance. Use caution in selecting a power line
conditioner for your system. In particular, avoid using inexpensive “surge
protectors”. Although these can prevent damage from high voltage
spikes, they often degrade performance.
Leaving the AC power on
The Wadia 3
33
302 CD Player is designed to be able to have the AC power
on with no harm or wear to the unit. To reduce wear and power
consumption, all motors and laser circuitry turn off when the unit stops
playing. Leaving the power on allows the circuitry to remain at a
constant operating temperature, providing better performance and
longer life. However, there is always a slight increase in risk of fire or
damage to any electrical component when the power is left on. We
leave the decision to leave the Wadia 3
33
302 CD Player powered to the
individual owner.
Break-in and warm-up
Careful listeners will notice that the sound of the Wadia 3
33
302 CD Player
improves steadily after the unit is powered-up. A new unit will undergo
more dramatic changes when power is applied for the first time.
Depending on the resolution of the system and the attentiveness of the
listener, you may find that the sound continues to improve over the first
several weeks of operation. If the power is disconnected for a period of
an hour or more, the unit will undergo similar but less dramatic break-in.