To get the best performance from your Wadia 270 CD Transport, and for your own safety,
please read and follow these important safety instructions.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Before operating the Wadia 270 CD Transport please read all of the operating and
safety instructions.
Never place the Wadia 270 CD Transport near heat sources such as radiators, fireplaces,
stoves, or other appliances that produce heat. Avoid placing the Wadia 270 CD Transport
where it will be subject to direct sunlight or low temperatures.
This product is equipped with a three prong IEC power inlet that includes an earth ground
connection. To prevent shock hazard, all three connectors must always be used. If your
electrical outlets will not accept this type of plug, an adapter may be purchased. If an adapter
is necessary, be sure it is an approved type and that it is used properly, supplying an earth
ground. If you are not sure of the integrity of your home’s electrical system, contact a licensed
electrician for assistance.
AC extension cords are not recommended for use with this product. If an extension cord
must be used, be sure it is an approved type and has sufficient current carrying capacity
to power this product.
Before cleaning the Wadia 270 CD Transport, always disconnect the power supply cord.
Use a soft cloth and, if necessary, dampen with clean water. Never apply water, or any
other cleaner, directly to the chassis.
If you smell smoke, or an abnormal smell, immediately unplug the Wadia 270 CD Transport
from the power supply and contact your Wadia dealer.
Never attempt to service the Wadia 270 CD Transport beyond what is described in this
Owner’s Manual. All service should be performed by qualified service personnel.
Unplug unit if it becomes wet.
Do not open unit when attached to AC outlet.
10. Replace fuse only with the exact type originally included.
100
volt:
1
amp Slo-Blo
120 volt: 1 amp Slo-Blo
220 volt:
l/2
amp Slo-Blo
240 volt:
l/2
amp Slo-Blo
1
1.
Do not attempt to repair or modify your Wadia 270 CD Transport.