Filter
Top Products
11
Maintenance
procedures
Removing the Field Replaceable Modules
Each of the 4 microphone modules on the UHF-5805 were designed in
a way that allows them to slide out.
This is a convenient feature if ever a module needs to be repaired or replaced.
1. Remove the two screws that fasten the module to the front panel.
2. To remove the module, simply slide the module out of the compartment
NOTE: It might be helpful to use a flat-head screwdriver to nudge the module out of its compartment.
3. To re-insert, slide the module into compartment until it is completely
secured. Secure the module with
the screws.