VocoPro SUB-1200 Speaker User Manual


 
Getting Connected
Unpacking
Prior to beginning the connection process, carefully remove the unit from its shipping box. It is recommended to
reserve the original shipping material in the event that the unit needs re-shipping. Included in the box you will find
the Sub-1200, this instruction manual and an AC power cord.
Subwoofer connections
There are a couple of methods for connecting your Sub-1200 to your audio system. One method uses MDP
speaker cables, the other method uses RCA interconnect cables. Looking at the rear panel of the Sub-1200, you
will see two sets of MDP speaker terminals, one labeled ‘HI-LEVEL IN’, the other ‘HI-LEVEL OUT’, and two sets
of RCA jacks labeled ‘LINE IN’ and 'LINE OUT'. The configuration of your existing system will determine how you
will connect the Sub-1200.
Connecting to a Dolby Digital or DTS system
All Dolby Digital and/or DTS processors have a subwoofer/LFE output. If you decide to use a subwoofer/LFE
output connection (mono) to the Sub-1200, connect an RCA-plugged patch cable from the subwoofer/LFE output
to either the "L" or "R" channels of the 'LINE IN' jacks (RCA) on the Sub-1200.
Connecting to a system with separate components
If you only have one set of pre-amp outputs on your amplifier/mixer and need to send the signal to the Sub-1200
as well as another amplifier/mixer, first send the signal to the Sub-1200 via the 'LINE IN' (RCA) jacks, and then
from the 'LINE OUT' (RCA) jacks, connect a patch cable to the 'AUDIO INPUT' jacks on your amplifier/mixer.
WWW.VOCOPRO.COM
LA VERNE CALIFORNIA U.S.A.
!
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
115V
230V
OFF
0
PHASE 180
POWER
AUTO
LEVEL
LINE OUTLINE IN
CROSSOVER
FREQUENCY
ON
R
L
+ +- -
LEFT RIGHT
HI LEVEL IN
+ +- -
LEFT RIGHT
HI LEVEL OUT
AMP/MIXER
FL FR SL SR C S
Subwoofer Out
Line In
WWW.VOCOPRO.COM
LA VERNE CALIFORNIA U.S.A.
!
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
115V
230V
OFF
0
PHASE 180
POWER
AUTO
LEVEL
LINE OUTLINE IN
CROSSOVER
FREQUENCY
ON
R
L
+ +- -
LEFT RIGHT
HI LEVEL IN
+ +- -
LEFT RIGHT
HI LEVEL OUT
AMP/MIXER
AUDIO OUT
Line In
Line Out
AMP/MIXER
AUDIO IN
7