Filter
Top Products
Installation
Installation Environment
1. Water and Moisture - Do not use this unit near water – for example near a bathtub, washbowl, swimming pool,
or the like. Damp basements should also be avoided.
2 . Condensation - Moisture may form in the unit in the following cases:
• Immediately after a heater has been turned on
• In a steamy or very humid room.
• When the unit is suddenly moved from a cold environment to a warm one If moisture forms inside this unit,
it may not operate properly. To correct this problem, turn on the power and wait about one hour to let the
moisture evaporate.
3. Heat - The unit should be situated away from heat sources such as radiators and the like. It also should not be
placed in temperatures less than 5°C (41° F) or greater that 35° C (95° F).
Installation Placement
1. Good Ventilation - Audio products are provided with ventilation openings to allow heat generated during
operation to be released accordingly. If these openings are covered or blocked, heat build-up within the unit
can cause power failure and malfunction which could also result in a fire hazard.
2. Foreign Material – Care should be taken so that objects do not fall into and liquids are not spilled into the unit.
Do not subject this unit to obsessive smoke, dust, mechanical vibration or shock.
3. Magnetism – The unit should be situated away from equipment or devices that generate strong magnetism.
4. Stacking – Do not place heavy objects, other than system components, on top of the unit.
5. Surface – Place the unit on a flat, level surface.
Maintenance
Clean the panel and controls with a soft cloth lightly moistened with mild detergent solution. Do not use any type
of abrasive pad, scouring powder or solvent such as alcohol or benzene.
Service
1. Reading Instructions - This is probably one of the most important things to remember. All the safety and
operating instructions should be read before the appliance is installed and operated. The life span of your
purchase can depend on how well you take care of it.
2. Damage Requiring Service- The unit should be serviced by qualified service personnel when:
a. The A/C power supply cord or the plug has been damaged
b. Objects have fallen or liquid has been spilled into the unit
c. The unit has been exposed to rain
d. The unit does not appear to operate normally or exhibits a marked change in performance
e. The unit has been dropped, or the enclosure damaged
3. Servicing – The user should not attempt to service the unit beyond that described in the operating instructions.
All other servicing should be referred to qualified service personnel.
6