VocoPro DA-1055 PRO Stereo Equalizer User Manual


 
Front Panel
1. Power switch - Turns the power On and Off.
2. Music Level control - Adjust the volume of source music. Move sliders up and down to increase or decrease
the volume output for that channel.
3. Graphic EQ On/Off switch - Turns the 7-Band Graphic Equalizer on and off.
4. 7-Band Graphic Equalizer - This will increase or cut the 7 different frequencies from 64 Hz (Lower Frequencies)
to 16K Hz (Higher Frequencies), for precise room tuning of the source music.
5. Microphone Master Level control - Use this control to adjust the overall volume of the microphones.
6. Microphone Low Frequency EQ control - Use this control to boost or cut the lower frequency (Bass) of
the microphones by +/-15 dB. Turning to the right provides boost, adding warmth to vocals, and turning to the left will
reduce the bass.
7.Mid Sweep control (Microphone) - Use the Mid-sweep (Frequency) control to determine which frequency
to boost or cut. Since the frequency ranges from the Mid-Sweep are from 250 Hz to 6K Hz, this is particularly versatile
for vocals, and enabling particular characteristics of the singer to be lifted or suppressed.
8. Mid Frequency EQ control (Microphone) - Use the Mid EQ to boost or cut Mid-frequency of the
microphone by +/-15 dB.
9. High Frequency EQ control (Microphone) - Use this control to boost or cut the high frequency
(Treble) of the microphones by +/-15 dB. Turning to the right provides boost, adding crispness to vocals, and turning to
the left will reduce hiss or distorted consonants and controls the feedback from the microphone.
10. Mic Input Volume controls - Use these controls to adjust the microphone input levels for
each microphone pair.
• Mic Volume 1 controls MIC 1 Input (front panel) and MIC 1/B Input (rear panel)
• Mic Volume 2 controls MIC 2 Input (front panel) and MIC 2/B Input (rear panel)
• Mic Volume 3 controls MIC 3 Input (front panel) and MIC 3/B Input (rear panel)
11. Vocal Cancel switch - Press this to cancel the guide vocal of Multiplex formatted karaoke CD+G discs.
NOTE: This feature only works with Multiplex formatted discs.
12. Input Source selector - Press this to select both audio and video between the two input sources you wish
to play. (DVD, CD+G)
13. Echo On/Off switch - Press this to turn the microphone Echo on and off.
14. Pan Control (Microphone) - Use this control to balance the microphone output between the right
and left channels.
15. Microphone Echo Level control - Controls the digital echo levels for microphones 1 to 6. Turn to the
right to increase the echo effect and turn to the left to decrease the echo effect.
16. Echo Repeat Level control - Use this control to adjust the repetition interval of the digital echo effect.
17. Echo Delay Time control - Use this control to adjust the timing of the digital echo effect.
18. Microphone Inputs jacks 1, 2 & 3 - Connects your microphones for vocal input.
NOTE - To protect the speakers and the amplifier from microphone feedback, turn down the microphone volume before
connecting the microphones.
Descriptions and Functions
9
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 17