Filter
Top Products
9
Connecting to an Audio System (Mixer, Amp, etc.)
What you will need:
• RCA cable (included)
• A Mixer and/or Amp with RCA Audio input
1. Using L/R RCA cables, connect the AUDIO OUT on the rear panel of the CDG-1020PRO deck to the AUDIO IN on a
mixer or amp.
Connecting to a TV or Monitor
What you will need:
• RCA cable (included)
• A TV and/or Monitor with RCA Video input
1. Using an RCA cable (yellow), connect the VIDEO OUT on the rear panel of the CDG-1020PRO deck to the VIDEO IN
on a TV or monitor.
NOTE: If your TV or monitor has only one video input, you may need a video switching device or a mixer with video
switching.
Getting Connected
CDG-1020PROMixer
CDG-1020PRO