Filter
Top Products
PROGRAMMING THE SOUND BAR
You can program your Sound Bar to accept TV remote IR commands. Press the Menu button on the remote, then use the Up/Down
buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
Function LED Behavior Description
Learn Volume
Down
Press the Play button to put the Sound Bar into learning mode. While the Sound
Bar is in learning mode, press the Volume Down button on the TV remote
control. All of the LED Indicators on the Sound Bar will ash two times indicating
that it has successfully recognized the TV remote.
Learn Volume Up
Press the Play button to put the Sound Bar into learning mode. While the Sound Bar
is in learning mode, press the Volume Up button on the TV remote control. All of the
LED Indicators on the Sound Bar will ash two times indicating that it has successfully
recognized the TV remote.
Learn Mute
Press the Play button to put the Sound Bar into learning mode. While the Sound
Bar is in learning mode, press the Mute button on the TV remote control. All of
the LED Indicators on the Sound Bar will ash two times indicating that it has
successfully recognized the TV remote.
Learn Vol+
Learn Mute
Learn Vol-
(Waiting to learn)
Flash from bottom to top
and back continuously.
All of the LEDs will
blink twice to conrm.
Turn o your TV speakers when
programming your sound bar.
Point both the sound bar and TV
remotes towards the front of the
sound bar when programming.
21