Filter
Top Products
- 24 -
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532
I/O settings
Digital output
Video Receiver supports four digital outputs, they can be configured to following any
digital output of video source.
“Enable” Select it to enable the digital output of Video Receiver. This digital output will
follow D/O ID 1~4 (Ex:
) of channel 1~4 (Ex: ).
Keyboard
The keyboard can be connected with Video Receiver via RS485 interface. The following
fields in Video Receiver must be set the same with the keyboard.
“Baud rate” The transmission speed between Video Receiver and keyboard
“Data bits” The length of a data
“Stop bits” The length of stop bit
“Parity bits” The type of parity check