Filter
Top Products
To attach the wall-mounting device to the wall:
ATTENTION:
For best performance, it is recommended that
the speakers be angled toward the listening
position. This means that special attention must
be paid when mounting the brackets.
If you have chosen to mount a pair of speakers
with the tweeters on the inside, mount the
bracket with the thin flat profile to the inside. If
mounting a pair of speakers with the tweeters on
the outside, mount the bracket with the thin flat
profile to the outside.
If you have chosen to use a speaker as a center
channel, two position options are allowed, either
angled up or down. To angle up, the thin flat
profile of the bracket should face up. To angle
down, the thin flat profile of the bracket should
face down.
1. First mark the position on the wall using the
holes of the wall-mounting bracket as a guide.
2. After drilling the holes, put the included
anchors (metal for sheetrock or other wall board,
or plastic for plaster or concrete wall construction
material) into the wall.
3. Now fix the wall-mounting bracket to the wall,
by using the provided screws.