Filter
Top Products
MOUNTING WEBERN & BERG
A. On wall application:
To prepare the speakers for wall mounting:
1. Please put on the enclosed gloves to avoid
fingerprints.
2. Remove the aluminium inlays on the top and
bottom of the speakers. As they are attached
with magnets, they simply lift off.
3. Put the matching wall-mounting inlay on each
speaker, so that the two holes for the two bolt
sockets line up.
ATTENTION:
The two inlays are slightly different for use on
each of the respective sides. In order to mount
the inlays correctly the three conical milled points
must be visible and the mounting bolts are able
to be inserted.
4. Now attach the appropriate inlay with the two
bolts, by using the hexagon-tool (Allen wrench/
key).
5. Now turn the speaker over and execute the
same procedure.