Venturer STS91 Home Theater System User Manual


 
E - 31
(continued on next page)(continued on next page)
(continued on next page)(continued on next page)
(continued on next page)
Subwoofer
1.Press the SETUP button.
2.Use
or button to select the Audio, press the ENTER button.
3.Use or button to Subwoofer, and then press the ENTER button.
4.Use
or button to select the desired setting, and then press the ENTER button.
5.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Subwoofer
"On" should be selected if your subwoofer is connected.
If "Off" is selected, no sound will be emitted by subwoofer.
Note :
You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND".
Customizing the Function Settings
Surround Delay
1.Press the SETUP button.
2.Use
or button to select the Audio, press the ENTER button.
3.Use or button to Surround Delay, then repeatedly press the ENTER button to select the desired Surround
Delay type. 0/15ms, 5/20ms, 10/25ms or 15/30ms appears.
4.To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Notes:
The first number represents the Dolby Digital and the second number represents the Pro Logic.
The delay adjustment depends on the location of your surround speakers and the front speakers. If the location
of the surround speakers is closer than the front speakers, the delay adjustment can compensate the distance
difference.