Venturer STS91 Home Theater System User Manual


 
E - 16
Adjusting the Sound
The following table shows which speakers are working in the various modes.
5.1- Represents FRONT LEFT/RIGHT, REAR LEFT/RIGHT, CENTER speakers and SUBWOOFER
2.1- Represents FRONT LEFT/RIGHT speakers and SUBWOOFER
5 - Represents FRONT LEFT/RIGHT, REAR LEFT/RIGHT and CENTER speakers
2 - Represents FRONT LEFT/RIGHT speakers
EMU MATRIX MUSIC MOVIE
BY
PASS
SMALL ON 5.1 5.1 5.1 5.1 5.1 or 2.1
LARGE ON 5.1 5.1 5.1 5.1 5.1 or 2
--- OFF 5 5 5 5 5 or 2
SMALL ON 2.1 2.1 2.1 2.1 2.1
LARGE ON 2 2 2 2 2
--- OFF 2 2 2 2 2
5.1 CH --- --- 5.1 5.1 5.1 5.1 5.1
2.1 CH --- ON 2.1 2.1 2.1 2.1 2.1
--- --- OFF 2 2 2 2 2
--- ON 5.1 5.1 5.1 5.1 5.1
--- OFF 5 5 5 5 5
SMALL ON 2.1 2.1 2.1 2.1 2.1
LARGE ON 2 2 2 2 2
--- OFF 2 2 2 2 2
TUNER --- --- --- --- 2.1 2.1 2.1 2.1 2.1
SMALL ON 5.1 5.1 5.1 5.1 5.1
LARGE ON 5.1 5.1 5.1 5.1 2.1
--- OFF 5 5 5 5 5
Dolby Pro
Logic II not
applied on
Tuner, MP3
and PCM
DVD.
---
PCM
DVD
MP 3
2.1 CH
5.1 CH
DVD MODE
AV_IN ---
DVD /
CD
SUB-
WOOFER
ON/OFF
Dolby Pro Logic II Selection
5.1 CH
2.1 CH
FUNCTION DISCS
5.1 / 2.1
CH
Button
L/R
SPEAKER
(SMALL/
LARGE)
To select the listening channel
1.When the disc is stopped, you can press the 5.1/2.1 CH button on the remote control to select different speakers
output status shown on below table.
2.At AV IN function mode, you also can press the PRO LOGIC II button repeatedly on the remote control to select
PRO LOGIC II (indicator on the front panel of display will illuminate).
3.You can active or off subwoofer output by setup menu.
Notes:
The wording "2.1 CH" will be corresponded to the audio/sound output from Front Left and Front Right speakers
plus the Subwoofer.
5.1/2.1 CH button is no response to JPG CD-ROM or JPG/MP3 CD-ROM. Please select 5.1/2.1 CH output
before putting such CD-ROM.
Dolby Digital 5.1 CH will not be activated on Pro Logic II.
Pro Logic Emulation Mode (PL II and EMU)
The Pro Logic emulation mode offers users the same robust surround processing as original Pro Logic, in case the source content
is not of optimum quality, or if there is a desire to hear the program more "as it used to be". When this mode is used, it is called Pro
Logic, as before. There is no "Pro Logic I" mode. The Pro Logic emulation mode is optional. Dolby does not require PLII products
to use the original Pro Logic decoding algorithm. However, if the DSP contains the original Pro Logic code, and if the product maker
would like to use it, this is quite acceptable and even encouraged. A product must not offer both original Pro Logic and the Pro Logic
emulation mode.
Manufactured under license from Dolby Laboratories.
'Dolby' , 'Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories.
Matrix Mode (MATRX)
The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance
mono signals by making them seem "larger". The Matrix mode may also find use in auto systems, where the fluctuations from poor
FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo
reception may be simply to force the audio to mono.