Filter
Top Products
6
.
www.velodyne.com
VX-11 User’s Manual
W
hen installing your new Velodyne subwoofer using the line level connections, you should always
use shielded phono cables. There are many high quality cables available today, most any of
which will work perfectly well. We do recommend that you keep the length of cable as short as
possible to avoid any potential noise problems.
When using speaker level connections, use a high quality quality speaker cable that mates well
with the connectors. Be very careful to avoid any loose strands or frayed wires which may result
in a short, which may damage your equipment. Cables of extremely large size are typically not
required. Extremely large gauge wire may not properly fit in the binding posts, resulting in a
poor connection and possible short circuits.
Your Velodyne subwoofer does not require any regular maintenance. Normal dusting or cleaning
of the surface for appearance purposes is all that is required. We suggest you avoid any harsh
detergents or chemicals when cleaning the cabinet. We recommend using only a damp cloth
for cleaning and to avoid abrasives, detergents, or cleaning solutions which may damage the
finish on the cabinet.
During normal conditions, your new subwoofer may be left on continuously without any
problems. The unit is equipped with a signal-sensing on/off switch that will automatically turn
on the unit when a signal is pr
esent at the inputs and turn off the unit after several minutes
when ther
e is no longer any signal at the inputs. If your subwoofer is not to be played for an
extended period of time we recommend you unplug the unit.
Interconnect Cables
Care of Your Subwoofer