Velodyne Acoustics DPS-10 Speaker User Manual


 
Congratulations
1
.
www.velodyne.com
DPS User’s Manual
C
ongratulations on your purchase of a Velodyne Digital Power Slot™ (DPS) subwoofer system.
This system represents the state-of-the-art in low frequency reproduction. Read and follow the
instructions below to insure safe and proper system operation.
Warning!
To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid
electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all
warnings on the equipment itself. There are no user serviceable parts inside. Please refer all
service questions to your authorized Velodyne dealer.
Prior to Installation
Please unpack the system carefully. Please save the carton and all packaging materials
for future use. Record the serial number in the space provided on the warranty card for
future reference.
Product Features and Controls
Microprocessor-controlled
Four selectable presets for customized listening mode
• Selectable option to activate Auto-on/off feature
• Night-mode setting
• Built-in 185 watt (RMS) power amplifier (DPS-10)
• Built-in 200 watt (RMS) power amplifier (DPS-12)
• Adjustable (40 to 120 Hz) low-pass crossover with Subwoofer Direct setting
Speaker
-level inputs and outputs
• Line-level inputs
• Variable volume control
Selectable phase control (0 or 180 degrees)
• Dual stagger
ed low-pass crossover; 12 dB/octave initial, 24 dB/octave ultimate
• Anti-clipping circuit
• Over excursion protection
• Slot loaded design