10
Plantronics SupraPlus Wireless Setup Guide
USING YOUR SUPRAPLUS WIRELESS HEADSET
WITH
YOUR DESK PHONE
Placing, Answering, or Ending Calls on your Desk Phone
Desk phone
Con guration
ALL phones with
Handset Lifter
Phones WITHOUT Headset
button and NO Handset
Lifter
Phones WITH Headset button
and NO Handset Lifter
To place a call 1. Press Call Control Button
2. Dial number
1. Press Call Control Button
2. Remove handset from cradle
3. Dial number
1. Press Call Control Button
2. Press Headset button on phone
3. Dial number
To answer a call 1. Press Call Control Button 1. Press Call Control Button
2. Remove handset from cradle
1. Press Call Control Button
2. Press Headset button on phone
To end a call 1. Press Call Control Button 1. Press Call Control Button
2. Place handset back on cradle
1. Press Call Control Button
2. Press Headset button on phone
For your safety, do not use headset at high volumes for extended periods of time. Doing so
can cause hearing loss. Always listen at moderate levels. For more information on headsets
and hearing visit: www.plantronics.com/healthandsafety
If the headset is charged and the base is connected to power, the headset is automatically on.
The SupraPlus Wireless does not have an ON/OFF button.
Powering the Headset on and o
If your desk phone has a volume control, set it to mid-range.
To mute headset, press the mute button
straight in. Press again to unmute.
Talk indicator light on base will ash while
muted.
You will hear 3 rapid beeps every 15 seconds
to indicate that mute is on.
Muting a Call
Volume settings are pre-set at the factory and for most phones will not require
adjustment. To ensure settings are correct for your phone, make a test call. If
you can not hear or be heard clearly, refer to the volume adjustments on the
following pages.