Filter
Top Products
8
Installing the Beltclip
1. Place the beltclip on the mounting area
on the back of the WHAM, making sure
the hole in the clip lines up with the
notch on the back of the WHAM.
2. Insert the screw into the corresponding
hole and tighten.
Or
1. Put the alkaline battery tray inside,
and install the 3 AAA batteries in
the tray.
2. Replace the cover.
3. Lock both sides of the battery
compartment.
4. Tighten the screw on the cover.
WHAM_UA466ZL UA01466ZA_0 9/20/02 12:50 PM Page 8