Uniden DRX100 Headphones User Manual


 
11
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press
MEnu/sElEcT
and
select
Create New.
Enter a name, number, and then assign a speed dial
number and a personal ring if desired.
Enter the phone number (up to 20 digits) exactly as you would dial it.
If you need the phone to wait before sending the next set of digits, press
rEdial/PausE
to insert a 2-second pause. You can insert multiple pauses,
but each one counts as a digit (you’ll see
P
in the display).
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Press
MEnu/sElEcT
and
select
Delete All
. When the phone prompts you to confirm, select
Yes
.
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific
period of time.
1. With the phone in standby, press and hold
#
on any handset. The phone
prompts you to select the number of hours (
1
-
9
or
Always On
) that you
want it to stay in silent mode.
2. To confirm, press
#
or just wait about 5 seconds. The phone turns on the
answering system and displays
Silent Mode On
on each handset.
3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#
again.
Multihandset Features
# To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came
with the base and up to 11 DCX170 accessory handsets. Your base also
supports a total of 2 DRX100 range extenders, including any that came
with your phone. If you have any DWX handsets, the D1760 is limited to
a total of 6 accessory handsets.
You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a Not Registered message. For
registration instructions, see p. 16, or see the accessory handset manual.